
Green Approach to
Cooling Water Management
Revive Aqua are the Australian distributors for DeCaIon (DCI) technology.
Safeguarding our health, protecting our environment and our future.
Welcome to Revive Aqua
At Revive Aqua, we are committed to delivering products that provide both sustainable and restorative solutions for businesses and the environment. We are the Australian distributor for the patented DeCaIon (DCI) technology.
The DCI System, offered by Innovative Polymers Pte Ltd, is an eco-friendly cooling water management solution designed to reduce energy, water waste, and chemical consumption of a water cooling tower. It aims to provide reliable and sustainable cooling for various industries, enhancing environmental protection and economic efficiency.
The DCI system suppresses the growth of Legionella, and Heterotrophic bacterial colonies as well as targeting scale and corrosion.
Energy savings greater than 5%. Descaling the equipment allows for optimal performance of pump and compressor.
Water savings greater than 50%. Cycle of concentration (COC) will increase due to minimal Blow-Down.
Chemical savings 100%. No hazardous chemicals required.
Introducing DeCaIon™ (DCI)
The demand for eco-friendly technology is increasing rapidly. DeCaIon™ (DCI) is a revolutionary solution designed to reduce carbon emissions and footprints by optimising cooling water management.
It automatically eliminates scale, prevents corrosion, and bio-fouling in cooling water systems using applied electro-chemistry and intelligent control. DCI uses no hazardous chemicals, providing a true green solution for scaling and corrosion in large building HVAC systems and industrial chiller circuits, resulting in significant energy, water, maintenance, and chemical savings.
Eco-Friendly Efficiency Less energy. Less waste. Less water. Less chemicals
Reliability Consistent and dependable products
Functionality Designed for optimal use
Safety Ensures the well-being of users
Installing the DCI Technology will contribute to reducing Scope 3 emissions by targeting indirect emissions throughout the value chain. Get in touch with Revive Aqua to find out how you can address various aspects of Scope 3 emissions to better your overall carbon footprint reduction.
How DCI Works
Customer Experience
Harry Perkins Institute of Medical Research, Australia
DCI installed at Harry Perkins Institute of Medical Research
SIMTech A*STAR, Singapore
Energy Efficiency Assessment of DeCaIon™ (DCI) System for SIMTech Valley Block Water Cooling Tower System
FAQ
-
Our patented DCI works on simple and advanced electrochemistry principles by which Ca and Mg are dissolved from the cooling water circuitry and deposited on the electrodes. The cooling water system is maintained at tip-top conditions all the time.
-
The CataGreen integrated within the DCI unit will ensure these limits are met all the time without any external use of chemical biocides. Catagreen enhances overall performance.
-
Consumption is minimal. One-unit DCI-15A (including pump) requires 2 to 3 Amp (AC).
-
Unlike other equipment, DCI is a standalone piece of device that receives water from the tower basin and returns directly back to the tower after it has been processed by DCI. There is no interruption to your cooling system.
-
Like all equipment, you do need to maintain DCI. But for DCI such maintenance is very minimal. The electrodes would require to be replaced once every 1.5 years (approximate, site-specific) and the CataGreen once every ~ 4 months. (site specific)
-
DCI is installed as a side-stream equipment to the cooling tower. The max flow is about 2.5m3/h.
-
DCI progressively reduces the Total Hardness, conductivity and SiO2 in water. Therefore, you can now operate the cooling tower at a higher COC.
-
DCI will remove the existing hardness scale and bio-fouling on the condenser tubes, pipe, and as well as in the cooling tower. The pressure drop will reduce and heat transfer efficiency will improve and these result in lower compressor and pump energy requirements.
-
We use the Condenser Approach Temperature (CAT), Chiller Efficiency (kW/Ton), and also the bacteria counts. With DCI, the CAT and chiller efficiency will improve, and bacteria counts will stay within NEA guidelines.
-
As no chemicals are dosed, this discharge can either be reclaimed for other uses such as lawn watering and toilet flush or be discharged to sewers or drain directly.
-
Yes. DCI is equipped with an output as an option for you to access the info on your phone and computer.
-
Most of the NCDs are pseudo-scientific such as magnetic, electronic, electromagnetic, hydrodynamic, and catalytic devices. It is scientifically impossible for the above devices to function consistently as claimed. DCI is based on proven classic electrolysis technology.
Application
Industrial Chiller
Scale removal in industrial condensers and cooling towers reduces energy, water, maintenance and chemical costs.
Water Cooled HVAC Systems
A significant improvement in heat transfer and increased chiller efficiency leading to lower condenser approach temperatures.
Benefits
About Us
ReviveAqua are Australian Distributors for DCI. The Company is led by industry veterans, Richard Aird, and Bruce Ebzery. Get in touch with us and discover how the DCI device can drive your maintenance costs down and optimize your cooling tower efficiencies.
Richard Aird
Richard Aird
DIRECTOR & FOUNDER
Richard is a seasoned Operations Executive with expertise in sectors like Industrial Manufacturing, Product Development, and Agriculture. Highlights include:
Over a decade of international leadership, emphasizing offshore operations, value delivery, and growth.
Served as COO at Redflow Limited, directing cross-functional operations, and establishing both onshore and offshore facilities.
Previously headed Magnetica Limited as CEO & Managing Director, focusing on advanced MRI technology and strategic stakeholder engagement.
Known for integrity, teamwork, operational excellence, and adaptability with strong innovation, tactical execution, governance, and strategic decision-making.
Balances professional achievements with a passion for family, outdoor activities, and adventure motorcycling.
Bruce Ebzery
Bruce Ebzery
DIRECTOR & FOUNDER
Bruce is experienced at an executive level in the domains of sales, strategy development, project management, reporting, and business planning.
Strong business sales skills gained in product development/engineering services for the energy and water sectors.
Extensive corporate strategy experience with multinationals, utilities, and service companies. Successful in implementing strategy plans leading to operational gains.
Undergraduate qualifications enhanced by a Masters in Engineering and Technology Management, and a Masters in Business Economics.
Creative approach to problem solving and communicator who manages people and relationships for win/win outcomes.
Recently providing mentoring experience to a range of green technologies through industry incubators across water, energy, and manufacturing sectors.
A strong belief that we need to leave the planet in a better state than we found it.